RPM indicates rotational speed, but on its own it does not show how much water remains in the clothes. Radius, load distribution, duration, fabric and drainage also play a part.
Speed and extraction
During the spin cycle, the load moves with the drum, and some of the water can pass through the perforations and flow into the drain. The acceleration associated with rotation depends on the radius and the square of the angular speed. Therefore, two drums running at the same RPM do not necessarily have the same extraction performance.
The maximum shown on the panel does not guarantee that every programme will reach it or maintain it for the same length of time. Stability and load distribution can lead the controls to reduce the speed or repeat a redistribution cycle.
What residual moisture means
One way to express it is to relate the retained water to the reference dry mass, according to the test method. Illustrative example: if a 5 kg dry load weighs 7.5 kg after spinning, it retains 2.5 kg of water, equivalent to 50% of its dry mass. This calculation does not assign a class without knowing the applicable test.
The spin-drying efficiency classes use their own test conditions. They cannot be directly compared across methods and do not replace capacity per programme.
How this relates to subsequent drying
If less water is retained, there is less water to evaporate, all else being equal. The effect on the energy use and time of a washer-dryer also depends on the system and the drying target.
The speed should be suitable for the fabric. Spinning does not dry clothes using heat, and a high RPM figure cannot guarantee that clothes will be ready to put away.
Compare residual moisture and test conditions alongside RPM; do not treat maximum speed as a standalone indicator.
View all articles in Washing machine efficiency: electricity, water and sustainability
