RPM indicates rotational speed, but on its own it does not tell you how much water remains in the clothes. The drum radius, load distribution, duration, fabric and water drainage also play a part.
Speed and extraction
During the spin cycle, the load moves with the drum, and some of the water can pass through the perforations and drain away. The acceleration associated with rotation depends on the radius and the square of the angular velocity. That is why two drums spinning at the same RPM do not necessarily have the same extraction conditions.
The maximum shown on the control panel does not guarantee that every programme will reach it or maintain it for the same length of time. Stability and load distribution can cause the control system to reduce the speed or repeat a redistribution cycle.
What residual moisture means
One way to express it is to compare the water retained with the reference dry mass, according to the test method. Illustrative example: if a 5 kg dry load weighs 7.5 kg after spinning, it retains 2.5 kg of water, equivalent to 50% of its dry mass. This calculation does not determine a class without knowing the applicable test.
The spin-drying efficiency classes use their own conditions. They cannot be directly compared across different methods and do not replace capacity by programme.
How this relates to subsequent drying
With less water retained, there is less water to evaporate if all other factors are comparable. The effect on energy use and drying time in a washer-dryer also depends on the system and the drying target.
The spin speed must be suitable for the fabric. Spinning does not dry clothes using heat, and a high RPM does not guarantee that clothes will be ready to put away.
Compare residual moisture and test conditions alongside RPM; do not treat maximum speed as a standalone indicator.
View all articles in Washing machine efficiency: electricity, water and sustainability
