Washing can release fibres from different textiles. Microfibre describes size and shape; microplastic refers to the material, so not every shed fibre is plastic.
The pump filter is not the same as fine-particle capture
An accessible drain filter may be designed to retain relatively large objects or debris. Do not assume it has the same function as a dedicated microfibre device without knowing its retention size and how it was tested.
| Location | What to check |
|---|---|
| External outlet filter | Hydraulic compatibility, retention, capacity and maintenance |
| Dedicated integrated filter | Function stated by the manufacturer and access to the collected debris |
| Device placed inside the drum | Textiles, load and test programme, as well as compatibility with use |
What the evidence allows us to claim
A community study by Erdle and colleagues installed filters in 97 homes and observed a reduction in microfibres in the final effluent of the system studied. This result cannot be used to assign the same percentage to other filters, fabrics or installations.
The National Park Service describes external and in-drum devices. Comparing them requires a protocol, the size of fibres retained and a method of measurement: fibre mass and fibre count are not interchangeable metrics.
Installation and disposal of captured fibres
A filter must not restrict the drain beyond what is permitted. Follow the manufacturer's recommended removal frequency and method. Keep captured fibres for disposal as instructed, rather than washing them back into the drain when cleaning the filter.
Care of synthetic fabrics and environmental impact cover other parts of the problem. Total capture is not guaranteed, and no worldwide legal requirement is assumed.
Compare results from the same test and make sure captured fibres are managed as waste appropriately.
View all articles in Washing machine efficiency: electricity, water and sustainability
