
On the documented Toshiba AW-E900LM top-loading washer, the alternating dashes and numbers are part of the code. E2-1 and E2-3 should not be shortened to an incomplete E2.
Read the complete sequence
The official AW-E900LM manual for Malaysia shows codes that alternate between a prefix and a second group. Record a short sequence or note down both states before changing the programme. The model is the context for verification, not a guarantee that this applies to every Toshiba.
Choose the relevant check
- E1 points to the drain system on this top-loading washer, with its specific outlet design.
- E2-1 and E2-3 distinguish between an open lid and a lid that is not closed or locked.
- E3-1 and E3-2 share a check of the load balance and support.
- E5 points to the water supply.
The steps for resuming operation may also differ between signals. An instruction to close the lid for E2-1 is not a substitute for checking the lock for E2-3.
If your machine is front-loading or its model number does not match this documentation, consult its own code table. Do not copy hose-height measurements from a machine with a pump to this design, or infer compatibility based on the manufacturer’s wider industrial group.
Frequently Asked Questions
Should I also note down the number that appears after E2?
Yes. In the AW-E900LM manual, E2 alternates with -1 or -3, and that second part distinguishes between an open lid and a lid that is not closed or locked.
Does E1 mean there is no water supply on every Toshiba?
No. On the AW-E900LM, E1 points to the drain system. Another platform requires its own manual; you should not select the water supply as the issue based only on a generic table.
Can E3-1 and E3-2 be checked together?
In the manual consulted, both refer to checking the load and support. Even so, keep the observed suffix when recording the issue.
Where can I verify the code table for my platform?
In the user manual that matches the complete model number on the rating plate. The table used here is for the AW-E900LM distributed in Malaysia.
If the panel alternates between codes, send both images to support; the number shown after the prefix is part of the identification.




