For the documented Toshiba AW-E900LM top-load model, E1 points to a drainage issue. Check the outlet hose route without copying the height requirements of a front-load model with a pump.
This association is confirmed on page 18 of the official AW-E900LM manual. A table that attributes E1 to water supply should not be applied to this model.
Check the hose with the machine stopped
Check whether the hose is installed as instructed in the manual, and whether it is bent, crushed or externally blocked. Also check whether its end is submerged and whether it has been exposed to freezing temperatures. A hose that appears clear along one section may be restricted at its final connection.
Follow the model's outlet design: raising the hose to imitate an installation with a pump may prevent drainage. Do not dismantle the valve or drain motor.
For the AW-E900LM, after correcting an external issue and with the drum stopped, the manual says to open and close the lid once, then press Start/Hold to resume. If E1 returns, arrange an inspection; do not keep trying to spin with water trapped inside or open the appliance to check internal components.
Describe how the hose ends and whether its installation has been changed; this will help assess the correct drainage setup for this top-load model.
View all articles in Toshiba washing machine error codes and alerts
