Error E5 in Toshiba washing machines: insufficient filling in top-load machines

E5 is related to the water supply in the documented Toshiba AW-E900LM. The tap, water availability and inlet restrictions are the first external checks.

Page 18 of the official AW-E900LM manual confirms this troubleshooting route. Its flow rates and times are not limits for other Toshiba models.

If no water enters

Check that the tap is open and that there is no water supply outage. If the machine has been in a frost-prone environment, do not force a rigid pipe because of ice or apply a flame or boiling water; follow the recovery procedure in its manual.

Check whether the hose is crushed. The inlet mesh or filter should only be checked using the user procedure, after turning off the water and disconnecting the power supply before carrying out the specified work.

For the AW-E900LM, once the issue has been corrected and the drum has stopped, the manual says to open and close the lid, then press Start/Hold. If E5 appears again when the water supply is available, report whether little or no water is entering and request an inspection. Do not attribute the alert to water pressure or the solenoid valve without checking.

If your Toshiba has a different model number, check the table first: the same E5 code does not guarantee the same filling logic.

View all articles in Toshiba washing machine error codes and alerts