Toshiba washing machine error codes and alerts

Toshiba washing machine error codes and alerts

On the documented Toshiba AW-E900LM top-loader, alternating dashes and numbers are part of the code. E2-1 and E2-3 should not be shortened to an incomplete E2.

Read the full sequence

The official Malaysian AW-E900LM manual shows codes that alternate between a prefix and a second group. Record a short sequence or note both states before changing the programme. The model provides verification context, not a guarantee for every Toshiba machine.

Choose the matching check

  • E1 points to the drain system on this top-loader, with its particular outlet design.
  • E2-1 and E2-3 distinguish between an open lid and a lid that is not closed or locked.
  • E3-1 and E3-2 both call for checking the load balance and support.
  • E5 points to the water supply.

Resuming operation may also differ between signals. An instruction to close the lid for E2-1 does not replace the lock check for E2-3.

If your machine is a front-loader or its model number does not match this documentation, check its own table. Do not copy hose-height measurements from a machine with a pump to this design, or infer compatibility based on industrial affiliation.

Frequently Asked Questions

Should I also note the number that appears after E2?

Yes. In the AW-E900LM manual, E2 alternates with -1 or -3, and that second part distinguishes between an open lid and a lid that is not closed or locked.

Does E1 mean there is no water in every Toshiba machine?

No. On the AW-E900LM, E1 points to the drain system. Another platform needs its own manual; do not select the water supply just because a generic table says so.

Can I check E3-1 and E3-2 together?

In the manual consulted, both refer to checking the load and support. Still record the suffix you observed when logging the fault.

Where can I check the table for my platform?

In the user manual that matches the full model number on the rating plate. The table used here is for the AW-E900LM supplied in Malaysia.

If the panel alternates between codes, send both images to support; the number shown after the prefix is part of the identification.