U12 indicates an open door in the Panasonic FR1 family. Check that the door is visibly closed when the machine allows you to open it; don’t confuse this with a hold due to water or temperature.
The FR1 table identifies this status for NA-V10FR1 and NA-S106FR1. A top-loader may need a different setup and procedure.
If the cycle won’t start
Check that the laundry is inside the drum and isn’t caught in the seal. Check whether anything is stopping the door from reaching its closed position, then close it normally. Don’t hit it or hold the latch down to try to start the programme.
If the door is already closed but U12 appears again, make a note of that. The message alone doesn’t distinguish a broken part from another failure to confirm the door is closed.
If it appears during the programme
Pause the machine and respect its safety lock. Water, heat or movement may prevent the door from opening, even if you want to check the edge. Don’t force the handle or bypass the lock. If the area around the machine is clear and the warning persists, request assistance and provide the model number and the point in the cycle when it appeared.
When requesting help, distinguish between a door that won’t close properly and one that closes but is still detected as open.
View all articles in Panasonic washing machine error codes and warnings
