U12 error on Panasonic washing machines: door open or not closed

U12 indicates an open door in the Panasonic FR1 range. Check that the door is visibly closed when the machine allows you to open it; do not confuse this with a lockout caused by water or temperature.

The FR1 table identifies this status for the NA-V10FR1 and NA-S106FR1. A top-loading machine may require a different arrangement and procedure.

If the cycle does not start

Check that the laundry is inside the drum and is not caught in the seal. Check whether anything is preventing the door from reaching its closed position, then close it normally. Do not bang it or hold the latch down to try to start the programme.

If the door is already closed but U12 appears again, make a note of this. The message alone cannot distinguish a broken part from another failure to confirm that the door is closed.

If it appears during the programme

Pause the machine and respect its lockout. Water, heat or movement may prevent the door from opening, even if you want to check the edge. Do not force the handle or bypass the safety lock. If the area around the door is clear and the warning persists, request assistance and provide the model reference and the point in the cycle when it occurred.

When requesting help, distinguish between a door that will not close properly and one that closes properly but is still detected as open.

View all articles in Panasonic washing machine error codes and warnings