dE / dE1 / dE2 / E01 / E30 error in LG washing machines: door not closed or lock not confirmed

On the documented LG front-loading models, dE/dE1/E01 and dE2/E30 correspond to two door-closing situations: the door is not fully closed, or it is closed but the lock is not confirmed.

LG front-loading models: error code distinctions
MessageIndicated status
dE, dE1, E01Door not fully closed.
dE2, E30Door closed, but lock not confirmed.

These associations appear in the official front-loading model support. The mechanical click of the door does not prove that the electronics have received the confirmation needed to start.

Check around the door seal

With the drum stopped and the door unlocked, move any clothing caught between the seal and the door out of the way. Check for a garment pressing against the door from inside, or visible damage to the latch. Close the door normally, without slamming it, holding it under continuous pressure or bypassing the safety lock.

If there is already water in the machine or the programme was running hot, do not try to open the door and repeat this check until the machine allows you to. A recovery procedure authorised by the manual may clear a temporary fault; if the code appears again, that does not prove the door lock has been repaired.

For a lower drawer, use the SideKick door-lock guide. The guide to a door that will not open or close covers the other access-related situations.

When requesting an inspection, specify whether the door is physically closed and whether the alert appears before water enters or during the cycle.

View all articles in LG washing machine error codes and alerts