FE / E04 / E12 error in LG washing machines: overfilling detected

FE, E04 and E12 indicate overfilling in the documented LG front-loading machines. If the water level keeps rising or there is an overflow, stopping the water supply takes priority over clearing the code.

The LG front-loading table groups these code formats together. The alarm alone does not identify whether the cause is water entering the machine, level detection or the controls; diagnosis is needed.

Distinguish what you actually observe

  • Water continues to enter while the cycle is stopped: note this observation and turn off the tap; do not turn it on again to reproduce the issue as a test.
  • Liquid added through the dispenser: stop adding liquids and explain what was added. The drum must not be filled by hand to alter a programme.
  • Message shown without a visibly high water level: the level detection may need to be checked. Do not add water to make what you see match the alarm.

If there is a leak, avoid handling wet plugs or connections. Isolate the power supply from a dry, safe place if you can do so, or seek help. Do not run successive wash cycles to check whether it overflows again.

If the message is PE, follow the level-reading troubleshooting steps. If AE is activated, also note the leak detection. If FE recurs after external conditions have been corrected, the machine needs servicing.

Keep a record of the sequence of messages and how the water level changes; even if an overflow has been contained, do not resume operation until the cause has been identified.

View all articles in LG washing machine error codes and alerts