F01 warns of an insufficient water supply in the documented Hisense HWFY family. Check whether the tap is open and water is reaching the machine before treating it as an internal fault.
This correspondence is verified in the Hisense New Zealand HWFY7514/8514/9514/1014 guide, including S/T variants. It does not automatically apply to other series.
An initial pause is not the same as F01
These machines may weigh the load when starting. If only dashes appear and the programme continues through its sequence, refer to that status in the manual; this page applies when F01 is actually displayed.
Check your home's water supply and the washing machine tap. See whether the hose is crushed or kinked. If the water flow is low, check the pressure requirements against the full manual rather than copying limits from another model.
Clean the filters and disconnect a hose only as instructed in the user maintenance guidance, after shutting off the water supply and isolating the power. Do not dismantle the valve.
If water is available and F01 appears again, note whether any water reaches the drum and request an inspection of the water inlet system.
Keep the complete HWFY reference, including the suffix; this helps locate the correct water inlet procedure.
View all articles in Hisense washing machine error codes and alerts
