F01 warns of an insufficient water supply in the documented Hisense HWFY family. Check that the tap is open and water is flowing before treating it as an internal fault.
This correspondence is verified in the Hisense New Zealand HWFY7514/8514/9514/1014 guide, with S/T variants. It does not automatically apply to other series.
An initial pause is not the same as F01
These machines may weigh the load when starting. If only dashes appear and the programme continues through its sequence, check the manual for information about that status; this page applies when F01 actually appears.
Check your home's water supply and the washing machine's tap. Check whether the hose is crushed or kinked. If the water flow is low, compare the pressure conditions with the full manual; don't copy limits from another model.
Clean the screens and disconnect a hose only as directed in the user maintenance instructions, first shutting off the water supply and disconnecting the power. Do not disassemble the valve.
If water is available and F01 appears again, note whether any water reaches the drum and request an inspection of the water-filling system.
Keep the complete HWFY reference, including the suffix; it helps identify the correct water inlet procedure.
View all articles in Hisense washing machine error codes and warnings
