F01 error in Hisense washing machines: water inlet warning

F01 indicates an insufficient water supply in the documented Hisense HWFY range. Check that the tap is turned on and water is flowing before treating it as an internal fault.

This correspondence is verified in the Hisense New Zealand HWFY7514/8514/9514/1014 guide, including S/T variants. It does not automatically apply to other series.

An initial pause is not the same as F01

These machines may weigh the load when starting. If only dashes appear and the programme continues through its sequence, refer to that status in the manual; this page applies when F01 actually appears.

Check the household water supply and the washing machine tap. Check whether the hose is crushed or kinked. If the water flow is low, check the pressure requirements against the full manual rather than copying limits from another model.

Clean the filters and disconnect a hose only as directed in the user maintenance instructions, after turning off the water supply and isolating the power. Do not dismantle the valve.

If water is available and F01 appears again, note whether any water reaches the drum and arrange an inspection of the filling system.

Keep the complete HWFY reference, including the suffix; this helps you find the correct water inlet procedure.

View all articles in Hisense washing machine error codes and alerts