F01 warns of an insufficient water supply on the documented Hisense HWFY range. Check that the tap is open and that water is reaching the machine before treating it as an internal fault.
This code mapping is verified in the Hisense New Zealand HWFY7514/8514/9514/1014 guide, covering S/T variants. It does not automatically apply to other series.
An initial pause is not the same as F01
These machines may weigh the load when starting. If only dashes appear and the programme continues through its sequence, refer to the manual for that status; this page applies when F01 is actually displayed.
Check the household water supply and the washing machine tap. Look for any crushing or kinks in the hose. If the water flow is low, check the pressure requirements against the full manual rather than copying limits from another model.
Clean the filters and disconnect a hose only as instructed in the user maintenance guidance, having first turned off the water supply and isolated the power. Do not dismantle the valve.
If water is available and F01 reappears, note whether any water reaches the drum and request an inspection of the water-filling system.
Keep the complete HWFY reference, including the suffix; this helps identify the correct water inlet procedure.
View all articles in Hisense washing machine error codes and warnings
