F03 error in Hisense washing machines: drain warning

F03 indicates incomplete drainage in the documented Hisense HWFY range. A blockage in the external hose may prevent the water from draining; the code does not prove that the pump is faulty.

The Hisense HWFY guide links F03 to a drainage issue within the expected sequence. Confirm the model number and installation using the full manual.

Check the outlet and any water left behind

Check whether water is visible and whether the hose is pinched against a wall or behind the appliance. Check its connection to the household drain without changing its height based on a figure for another appliance.

A machine that does not finish draining may also prevent the spin cycle and keep the door locked. Do not force the handle or open a filter assuming the water has already drained.

If the manual specifies an accessible filter, follow its instructions for draining residual water, with the power disconnected and the water cooled. Not all Hisense models have the same access. If the issue persists after checking the exterior and carrying out authorised maintenance, request a diagnosis.

Report whether the machine did not drain at all or only drained partially, and whether F03 appeared after the washing machine was moved; this information will help guide the inspection of the outlet.

View all articles in Hisense washing machine error codes and alerts