Do not replace detergent with hand soap, washing-up liquid or a homemade mixture unless its compatibility with the machine and clothes is documented. The fact that a product cleans another surface does not tell you how to dose it for a wash.
The need changes the decision
If you have run out of detergent, put off doing the washing until you have a suitable formulation rather than making up a dose of another cleaner. If you want to remove an odour, look into the soiling, load and drying. If the problem is roughness, check for residue before adding anything.
Vinegar and bicarbonate of soda have different compositions, but knowing the ingredient does not tell you the right concentration, its effect on finishes or whether it is compatible with seals and circuits. Nor does the fizzing of a combination prove that it cleans or disinfects.
Checking additives without assuming they are interchangeable
Only add an additive if the relevant instructions allow that product and use. Do not mix formulations, use dishwasher cleaners as laundry detergent or add quantities just to see how much foam they produce. Appliances that require low suds need that compatibility from the outset.
Chlorine-based products require specific precautions: do not combine vinegar, acids, ammonia or other cleaners with laundry bleach or chlorine. Do not try to neutralise a mistake by adding another substance.
Go back to the cause of the result
A measured dose makes it easier to assess the wash than successive mixtures. For persistent odour, check when it appears and whether it is also present when the machine is empty. Adding fragrance or changing the acidity of the wash does not confirm that the cause has been resolved.
To tackle odour, roughness or soiling, check the relevant cause; replacing detergent with a mixture is not a reliable way to find out.
View all articles in Laundry detergents, dosing and additives
