Put each product in the place and at the stage indicated by both its label and the manual. The fabric softener compartment, the main-wash compartment and a bleach dispenser are not interchangeable.
Identifying the dispenser
I usually indicates pre-wash, II the main wash and a flower the fabric softener, but these are conventions you should check against the model’s guide. Some machines have a separate chlorine bleach dispenser; others dispense products directly into the drum or through automatic reservoirs.
- Check which compartments your machine has and which function is enabled.
- If you use liquid, check the position of any insert required by the drawer. Do not use parts from another model.
- Measure out the product. Do not exceed the compartment’s maximum capacity, which is not the same as a recommended dose.
- Close the drawer as instructed in the manual and check that no concentrated product remains on garments or surfaces.
Products that go in different places
Capsules may be intended for the drum; do not put them in a liquid reservoir because of their contents. Fabric softener usually works during the rinse and needs its own dispensing route. For chlorine bleach, use only an authorised arrangement.
For a pre-wash, check how the product is distributed between stages. With a delayed start, make sure it will not leak out too soon or remain on a garment. If the dispenser does not empty, distinguishing incorrect placement from dirt or a fault requires further investigation; changing compartments will not fix the problem.
If the product remains in the dispenser, investigate how it is meant to be dispensed; using another compartment may dispense it at the wrong stage.
View all articles in Laundry detergents, dosing and additives
