Place each product in the location and at the stage specified by both its label and the manual. The fabric softener compartment, main-wash compartment, and bleach dispenser are not interchangeable.
Identify the dispenser
I usually indicates prewash, II the main wash, and a flower the fabric softener, but these are conventions you should confirm in your model’s guide. Some machines have a separate chlorine bleach dispenser; others dispense products directly into the drum or through automatic reservoirs.
- Check which compartments your machine has and which function is active.
- If you use liquid detergent, check the position of any insert the drawer may require. Do not insert parts from another model.
- Measure the product dose. Stay within the compartment’s maximum capacity, which is not the same as a recommended dose.
- Close the drawer as directed in the manual and make sure no concentrated product is left on clothing or surfaces.
Products that don’t go in the same place
Laundry pods may be intended for the drum; do not put them in a liquid detergent reservoir because of their contents. Fabric softener usually works during the rinse cycle and requires its own dispensing path. For chlorine bleach, use only an authorized dispensing option.
For a prewash, check how the product is distributed between stages. With a delayed start, make sure it won’t dispense too early or remain on a garment. If the dispenser doesn’t empty, determining whether the cause is incorrect placement, a blockage, or a fault requires further inspection; switching compartments won’t fix the problem.
If the product remains in the dispenser, investigate how it is supposed to dispense; using another compartment may dispense it at the wrong stage.
View all articles in Laundry detergents, dosing and additives
