How to use fabric conditioner and when to leave it out

Fabric conditioner conditions the fabric; it does not replace detergent or a disinfectant. Use it only if the garment allows it and you can add it at the recommended stage and in the recommended amount.

The garment’s purpose determines whether fabric conditioner is suitable

For towels and other absorbent items, it matters that they can absorb water; for sportswear or garments with a membrane, their moisture-wicking or protective performance matters. Check whether the care label excludes fabric conditioner. A softer feel does not prove that the treatment is suitable for these purposes.

If you do not have a specific need to condition the fabric, you can leave it out. Do not add it by default to compensate for detergent residue or hard water: these issues need their underlying cause to be addressed.

Measure the dose without causing it to dispense too early

  1. Identify the designated compartment or the approved method if there is no dispenser.
  2. Measure the product using its own measuring guide and observe the maximum fill mark.
  3. Dilute it only when the packaging or appliance instructions say to; do not add water out of habit.
  4. Avoid pouring concentrated product directly onto clothes or mixing it with detergent in a compartment not designed for this.

If gel remains or the product is not dispensed, check the dispenser maintenance instructions. Switching compartments may cause it to be released at the wrong stage.

For towels and sportswear, follow the specific restrictions. If you experience skin irritation, review the formulation and washing routine without automatically attributing it to a particular cause.

View all articles in Laundry detergents, dosing and additives