Clean the washing machine after paper, tissues or an accidental nappy

After a tissue or an absorbent item has accidentally gone through the wash, first remove any paper, filling and gel you can reach. Do not add salt, solvents or mixtures to break them down: check the drainage and filters specified in the manual.

Identify what has been dispersed

Remove the load when it is safe to open the machine and separate out any visible debris. Paper fibres can stick to many surfaces; an absorbent item may release filling or gel. The aim is to collect the material, not push it towards the drain.

If water remains in the machine or it has not finished draining, do not open the filter directly. Any retained water must be dealt with using the procedure for your model. Do not force the door open to remove the load.

Clear accessible areas

  1. With the machine stopped, cool and disconnected from the power supply for manual cleaning, pick up by hand or with a soft cloth any material that comes away without force.
  2. Check the drum and the loading aperture. On a front-loader, pay attention to the folds in the door seal without inserting tools into its holes.
  3. Check the pump filter and any other traps that the manual says you can maintain. Remove solid material from outside the water circuit.
  4. Refit all parts and, only if drainage is working, complete the rinse or an approved maintenance cycle.
  5. Check the empty interior before putting in another load. If significant build-up continues to come out, arrange an assessment.

If there is organic matter too

Absorbent material and organic contamination are two separate issues. Removing gel does not confirm disinfection. If the incident requires it, see how to verify a disinfection method that is compatible with the appliance.

Do not repeat cycles in an attempt to dissolve a polymer, or use the clothes to collect what remains. If the machine will not drain, stop cleaning and report the incident to the service team.

Treat affected textiles separately; do not put them back in the drum while visible build-up remains in the machine.

Wait before putting in the next load until all parts are fitted, drainage is normal and no accessible residue remains.

View all articles in Cleaning the machine after accidental or heavy soiling