A washer-extractor washes, rinses and spin-extracts a batch. To calculate output, you need to add the time for loading, unloading and coordinating with the rest of the laundry to the cycle time.
What happens inside each batch
The machine receives a load, runs its phases and unloads it before processing the next batch in that space. Extraction reduces the water retained in the textiles by spinning and draining. The laundry may still need drying or another finishing operation.
The JENSEN JWE range documents high-flow inlets and drainage, programme control, and extraction linked to the drum diameter. These are features of that range, not minimum specifications for every washer-extractor.
What the figures mean
The nominal capacity is stated for specific loading conditions. Volume and the load factor relate space to the mass of textiles; a bulky batch may reach the space limit before the weight limit. Revolutions and extraction force are not the same measurement, and neither alone determines the final moisture content.
As a purely illustrative calculation, a 20 kg batch repeated every 40 minutes with no waiting time equates to 30 kg/h. If loading, unloading or supply shortages extend that cycle time, output falls. This calculation does not certify the performance of any machine.
Utilities and organisation
Identify the electrical supply, water, electric or externally supplied thermal heating, dosing and outlet. Assisted loading or tilting, if available, also requires suitable space and provision. Frame installation and the barrier between areas introduce separate requirements.
A tunnel line organises loads between modules and is sized differently; it cannot be compared solely by drum capacity in kilograms.
Distinguish batch capacity from actual throughput so you do not promise output that the utilities or downstream stages cannot sustain.
