A washer-extractor washes, rinses and spin-extracts a batch. To calculate output, add the time needed for loading, unloading and coordinating with the rest of the laundry operation to the cycle time.
What happens inside each batch
The machine receives a load, runs its phases and unloads it before processing the next batch in that compartment. Extraction reduces the water retained in the load by spinning and draining. The laundry may still need drying or another finishing operation.
The JENSEN JWE family documents high-flow inlets and drainage, programme controls and extraction related to drum diameter. These are features of that product family, not minimum specifications for every washer-extractor.
What the figures mean
Rated capacity is specified for particular loading conditions. Volume and the loading factor relate the space available to the mass of textiles; a bulky batch may reach the occupancy limit before the weight limit. Revolutions and extraction force are not the same measurement, and neither alone determines final moisture content.
As a purely illustrative calculation, a 20 kg batch repeated every 40 minutes with no delays works out to 30 kg/h. If loading, unloading or supply interruptions extend that cycle time, output decreases. This calculation does not certify the performance of any machine.
Utilities and setup
Identify the electrical supply, water, electric or external thermal heating, dosing and discharge. Assisted loading or tilting, if available, also requires adequate space and planned provisions. Frame installation and the barrier between zones add separate requirements.
A tunnel line organizes loads between modules and is sized differently; it should not be compared solely by drum capacity in kilograms.
Distinguish batch capacity from actual throughput so you don't promise output that the utilities or downstream stages can't sustain.
View all articles in Professional and industrial washers: types and differences from domestic use
