A washer-extractor washes, rinses and spin-extracts a batch. To calculate output, add the time needed for loading, unloading and coordinating with the rest of the laundry operation to the cycle time.
What happens inside each batch
The machine receives a load, runs its stages and unloads it before processing the next batch in that machine. Extraction reduces the water retained in the textiles through rotation and drainage. The laundry may still need drying or another finishing operation.
The JENSEN JWE family documents high-flow inlets and drainage, programme control and extraction linked to the drum diameter. These are features of that family, not minimum specifications for every washer-extractor.
What the figures mean
The nominal load is stated for specific loading conditions. Volume and the load factor relate space to textile mass; a bulky batch can reach the occupancy limit before the weight limit. Revolutions and extraction force are not the same quantity, and neither alone determines the final moisture level.
As a purely illustrative calculation, a 20 kg batch repeated every 40 minutes with no waiting time equates to 30 kg/h. If loading, unloading or a lack of supply extends that cycle time, output falls. This calculation does not certify the performance of any machine.
Utilities and layout
Identify the electrical supply, water, electric or external thermal heating, dosing and discharge. Assisted loading or tilting, if available, also requires adequate space and planned facilities. Frame installation and the barrier between areas add separate requirements.
A tunnel line organises loads between modules and is sized differently; it cannot be compared on drum capacity in kilograms alone.
Distinguish batch capacity from the actual cycle rate so you do not promise output that the utilities or downstream stages cannot sustain.
