Hard-mount or soft-mount industrial washer-extractor: mounting differences

In a hard-mount washer-extractor, rotational forces are transmitted differently than in an assembly with internal suspension. Assessing the suitability of the floor requires load data and installation details for the specific machine.

Two paths for transmitting forces

In a hard-mount design, the assembly is attached to the frame, with forces transmitted directly to the base and its foundation. In a soft-mount design, elastic elements and dampers allow relative movement and reduce some of the force transmission. Suspension does not eliminate mass, vibration or the demands placed on the building.

Speed Queen presents its soft-mount range as an alternative to hard-mount installation. This description does not mean that any soft-mount machine can be installed on an upper floor or on a floor structure that has not been assessed.

Documents the professional should check

  • Machine mass and specified static and dynamic loads.
  • Support layout, anchoring, and foundation or plinth requirements.
  • The condition of the existing floor, its structure and its location within the building.
  • Clearances, access and the combination of other equipment operating at the same time.

The Alliance F8619501EN installation manual sets out requirements for each machine and requires the support to be assessed, including cases that need structural consultation. Its thicknesses and fixings apply to the models covered, not as a general rule for industrial installations.

Levelling does not prove structural strength

A machine can be level and still stand on a floor that is not strong enough. Adjusting the feet does not correct floor deflection or the absence of specified anchoring. The explanation of domestic washer suspension shares some principles, but does not replace the design of a washer-extractor installation.

Choose the location using the load and installation drawings for the model; hard-mount or soft-mount is only the starting point.

View all articles in Professional and industrial washing machines: types and differences from domestic use