Rigid or suspended industrial washer: mounting differences

In a rigid-mounted washer-extractor, rotational forces are transmitted differently than in a unit with internal suspension. Assessing whether the floor is suitable requires load and installation data for the specific equipment.

Two paths for transmitting forces

In a rigid-mounted design, the assembly is connected to the frame, transmitting forces directly to the base and its foundation. In a suspended design, resilient elements and shock absorbers allow relative movement and reduce some of the force transmission. Suspension does not eliminate mass, vibration or the building’s structural requirements.

Speed Queen presents its softmount range as an alternative to rigid mounting. This description does not mean that any suspended machine can be installed on an upper floor or on a floor slab without assessment.

Documents the professional should check

  • The machine’s mass and its specified static and dynamic loads.
  • Support-point layout, anchoring, and foundation or plinth requirements.
  • The condition and structure of the existing floor, and its location within the building.
  • Clearances, access, and the combination of other equipment operating at the same time.

The Alliance F8619501EN installation manual sets out requirements for each machine and requires the support to be assessed, including cases that need structural consultation. Its specified thicknesses and fixings apply to the models covered, not as a general industry rule.

Levelling does not confirm structural strength

A machine can be level and still be standing on an inadequate floor. Adjusting the feet does not correct floor-slab deflection or the absence of specified anchoring. The explanation of domestic suspension shares some principles, but does not replace the design of an industrial washer-extractor installation.

Choose the location using the load and installation drawings for the model; rigid or suspended is only the starting point.

View all articles in Professional and industrial washing machines: types and differences from domestic use