Decibels and noise class: how to interpret a washing machine’s noise level

The declared noise level should be read together with its measured quantity and test phase. It is not necessarily the level a phone would record in a room, nor does it identify the cause of abnormal noise.

Three ways of describing sound

  • Sound power: describes the sound emitted by the source under defined conditions.
  • Sound pressure: describes the sound at a measurement point; it varies with distance and surroundings.
  • Structure-borne transmission: vibrations transmitted to other surfaces through the supports and building.

The decibel is a logarithmic scale. A numerical difference should not be read as a linear ratio of perceived loudness. The weighting and test method must also match.

Compare the same phase

A value for a quiet wash cannot be compared directly with one for a spin cycle. The European washing machine label identifies the noise level for the spin cycle; other product specifications should be checked against their own system. Classes and thresholds belong to that system.

A phone app can record approximate changes in the same place, but the microphone, automatic adjustment and position mean it cannot simply be equated with a standardised test.

What changes in a home

Reflections from walls, furnishings, distance and the floor affect how noise is perceived. The suspension system also affects transmission. That is why a motor type cannot guarantee quiet operation in every installation.

New knocks, scraping noises or humming need to be diagnosed by phase and context. The label value describes emission under test conditions; it cannot confirm faulty bearings or other parts.

Note the measured quantity, weighting and phase before comparing decibels; if any of these is missing, the comparison needs more context.

View all articles in Washing machine efficiency: electricity, water and sustainability