E02 indicates a door-closing fault on the verified Sharp ES-FW models. Do not treat it as a water supply issue because you are using a table for a different range.
This correspondence is documented in the Singapore ES-FW70EW/85SG/105SG manual. Keep the leading zero when noting the message.
Check the door and load
If the door can be opened and the drum has stopped, remove any items crossing the edge or preventing it from closing. Check whether the load is pressing against the door from inside and look for damage to the latch. Close the door normally, without slamming it or applying extra force to the handle.
The door may be physically shut without the lock being confirmed. If E02 persists, do not bypass the lock or hold the door closed while attempting to start the machine.
If the message appears part-way through a programme, observe the water- or heat-related lockout before opening the door. If it recurs with the area around the door clear, the machine needs to be checked. The water inlet warning for this range is E01 and should only be consulted when it matches the display.
Distinguish between the door not closing fully and the door closing but not being recognised by the machine; these are different observations for the service team.
View all articles in Sharp washing machine error codes and warnings
