Error E02 in the ES-FW series of Sharp washing machines: door lock fault

E02 indicates a door-locking fault on the verified Sharp ES-FW models. Do not treat it as a water supply issue based on a chart for another series.

This correspondence is documented in the Singapore ES-FW70EW/85SG/105SG manual. Keep the leading zero when noting the message.

Check the door and load

If the door can be opened and the drum has stopped, remove any clothes that cross the edge or prevent the door from closing. Check whether the load is pressing against the door from inside and look for damage to the latch. Close the door normally, without slamming it or applying extra force to the handle.

The door may be physically shut without the lock being confirmed. If E02 continues, do not bypass the lock or hold the door closed while trying to start the machine.

If it appears midway through a programme, allow for any water or heat-related lockout before opening the door. If the error repeats with the door area clear, the machine needs to be checked. The water inlet warning for this series is E01 and should only be checked when it matches the display.

Note whether the door will not close fully, or whether it closes but the machine does not recognise it; these are different observations for the service team.

View all articles in Sharp washing machine error codes and warnings