Error E02 in Sharp ES-FW washing machines: door lock fault

E02 indicates a door-closing fault on verified Sharp ES-FW models. Don’t treat it as a water-supply issue based on a chart for another product family.

This fault code is documented in the Singapore ES-FW70EW/85SG/105SG manual. Keep the leading zero when recording the message.

Check the door and load

If the door can be opened and the drum has stopped, remove any items crossing the edge or preventing the door from closing. Check whether the load is pressing against the door from inside, and look for damage to the latch. Close the door normally, without slamming it or applying extra force to the handle.

The door may be physically shut without the lock being confirmed. If E02 continues, don’t bypass the safety lock or hold the door closed while attempting to start the machine.

If it appears midway through a program, allow for any water- or heat-related door lockout before opening the door. If the error recurs with nothing obstructing the door, the machine needs inspection. The water-inlet warning for this product family is E01, and should only be checked if it matches the display.

Note whether the door won’t close or whether it closes but the machine doesn’t recognize it; these are different observations to report to service.

View all articles in Sharp washer error codes and warnings