E03 indicates abnormal drainage on the Sharp ES-FW70EW, ES-FW85SG and ES-FW105SG. Check the hose and user-accessible filter, draining the machine safely before considering replacing the pump.
Page 32 of the official ES-FW manual identifies E03. The same document describes filter maintenance; do not assume its access points apply to every Sharp model.
If water remains in the drum
Switch off the machine and inspect the external hose route. A kinked, crushed or incorrectly installed outlet hose can prevent draining even if the pump is audible. The connection to the drain must also follow the instructions for this range.
Before cleaning the filter, disconnect the power supply and allow the water to cool. Prepare containers and follow the manual’s procedure for draining residual water; do not unscrew the cap suddenly when the drum is full or the machine is running.
Refit the filter correctly before restarting the machine, following the manual. If the water does not drain or E03 reappears, arrange for the machine to be inspected. A filter with no debris does not, by itself, prove that the pump and control system are working properly.
Record whether cleaning revealed a blockage and whether the subsequent draining was complete; these results help narrow down the inspection.
View all articles in Sharp washing machine error codes and warnings
