Error E02 on Sharp ES-FW washing machines: door lock fault

E02 indicates a door-lock fault on the verified Sharp ES-FW models. Do not treat it as a water supply issue based on a chart for another model family.

This fault mapping is documented in the Singapore ES-FW70EW/85SG/105SG manual. Keep the leading zero when recording the message.

Check the door and load

If the door can be opened and the drum has stopped, remove any clothing caught over the edge or preventing the door from closing. Check whether the load is pressing against the door from inside, and look for damage to the latch. Close the door normally, without slamming it or applying extra force to the handle.

The door may be physically shut without the lock being confirmed. If E02 continues, do not bypass the safety lock or hold the door closed while attempting to start the machine.

If it appears midway through a programme, observe any water or heat-related lockout before opening the door. If the error recurs with the door area clear, the machine needs to be checked. The water inlet warning for this model family is E01, and should only be consulted when it matches the display.

Distinguish between the door not closing fully and it closing but not being recognised by the machine; these are different observations for the service technician.

View all articles in Sharp washing machine error codes and warnings