On the GE UltraFast Combo, error 18 and the Check and Clean Drain Pump Filter message point to drainage and the pump filter. They are not lint filter alerts.
Water left behind prolongs drying
The manufacturer's documentation links the cleaning message to drainage restrictions and code 18 to the pump filter. A load that finishes very wet may make the subsequent drying cycle take longer, but this alone does not confirm a pump fault.
Check the correct filter
Find the pump filter section in the UltraFast Combo manual. Stop the appliance, disconnect it safely and wait for the water to cool. Prepare for draining as instructed before opening the cap: there may be more water than is visible through the door.
Remove only accessible objects and debris, check the filter seat and refit the filter so it is watertight. Also check the hose and how far it extends into the household drain outlet, following the model diagram. The drain filter cleaning guide explains how to drain the appliance first.
If the error returns when the accessible drainage path is clear, arrange a service visit. Do not dismantle the internal system or clean the air filter as the sole response to error 18.
Say whether the problem occurs while draining, when the wash finishes, or only as an increase in drying time.
View all articles in GE Appliances washing machine error codes and warnings
