GE UltraFast Combo error code 353 is usually associated with fabric softener residue on the lint filter. The check concerns the drying air circuit.
Separate the filter foam and mesh
The manufacturer's documentation distinguishes the two parts of the lint filter. With the appliance switched off, remove it through the user access point and separate the parts as shown in the manual. Clean the foam and mesh using the approved method, without scraping them with tools or damaging the material.
A coating of product can restrict airflow even when there is no visible build-up of lint. Refit the parts in the correct orientation before using the Combo; do not run a drying cycle without the filter to see if performance improves.
Assess the result
After cleaning, use the wash-and-dry check specified by GE and note whether error 353 reappears. If the filter is fitted correctly but drying is still abnormal, request assistance.
18 and Check and Clean Drain Pump Filter relate to the water circuit. The GE Appliances index helps you tell them apart without assuming that every long drying cycle is caused by the same filter.
You should see an improvement with the complete filter assembly correctly in place.
View all articles in GE Appliances washing machine error codes and warnings
