Error 18 or Check and Clean Drain Pump Filter on GE Combo

On the GE UltraFast Combo, Error 18 and the Check and Clean Drain Pump Filter alert point to the drain and pump filter. They are not lint filter alerts.

Retained water that prolongs drying

The manufacturer's documentation links the cleaning alert to drainage restrictions and Error 18 to the pump filter. A load that finishes very wet can make the subsequent drying cycle take longer, but this alone does not confirm a pump fault.

Check the correct filter

Find the pump filter section in the UltraFast Combo manual. Stop the appliance, disconnect it safely and wait for the water to cool. Prepare for the specified draining procedure before opening the cap: there may be more water than you can see through the door.

Remove only accessible objects and debris, check the seal and refit the filter so it is watertight. Also check the hose and how far it extends into the household drain, as shown in the model diagram. The drain filter cleaning guide explains the preliminary draining procedure.

If the error returns with the accessible drain path clear, arrange a service call. Do not dismantle the internal system or clean the air filter as the sole response to Error 18.

Report whether the problem occurs while draining, at the end of the wash cycle, or only as an increase in drying time.

View all articles in GE Appliances washer error codes and alerts