Error 18 or Check and Clean Drain Pump Filter on GE Combo

On the GE UltraFast Combo, Error 18 and the Check and Clean Drain Pump Filter alert point to the drain and pump filter. They are not lint filter alerts.

Retained water that extends drying time

The manufacturer's documentation links the cleaning alert to restricted draining and code 18 to the pump filter. A load that finishes very wet may make the subsequent drying cycle take longer, but this alone does not confirm a pump fault.

Check the correct filter

Find the pump filter section in the UltraFast Combo manual. Stop the appliance, disconnect it safely and wait for the water to cool. Prepare to drain it as instructed before opening the cap: more water may remain than is visible through the door.

Remove only accessible objects and debris, check the filter seat and refit the filter securely to prevent leaks. Also check the hose and how far it is inserted into the household drain outlet, following the model diagram. The guide to cleaning the drain filter explains how to drain the water first.

If the error returns when the accessible path is clear, request service. Do not dismantle the internal circuit or clean the air filter as the sole response to Error 18.

Mention whether the problem occurs while draining, at the end of the wash, or only as an increase in drying time.

View all articles in GE Appliances washing machine error codes and alerts