Error 18 or Check and Clean Drain Pump Filter on GE Combo

On the GE UltraFast Combo, error 18 and the Check and Clean Drain Pump Filter message point to the drain and pump filter. They are not lint filter alerts.

Water retained, leading to longer drying times

The manufacturer’s documentation links the cleaning message to restricted draining and code 18 to the pump filter. A load that finishes very wet may take longer to dry afterwards, but that alone does not confirm a pump failure.

Check the right filter

Find the pump filter section in the UltraFast Combo manual. Stop the appliance, disconnect it safely, and wait for the water to cool. Prepare for the draining procedure described in the manual before opening the cap: there may be more water than you can see through the door.

Remove only accessible objects and debris, check the seal, and reinstall the filter so it is watertight. Also check the hose and how far it extends into the household drain, following the model diagram. The drain filter cleaning guide explains how to drain the water first.

If the error returns when the accessible drain path is clear, request service. Do not disassemble the internal system or clean the air filter as the only response to code 18.

Note whether the problem occurs while draining, at the end of the wash, or only as an increase in drying time.

View all articles in GE Appliances Washer Error Codes and Alerts