
The documented Fisher & Paykel front-load washers distinguish between use alerts and faults displayed as Err followed by a number. The model and the full message determine which check is appropriate.
Product families covered by this index
The WashSmart/QuickSmart front-load washer manual consulted covers WashSmart WH7560P1/WH8560P1 and QuickSmart WH7560J1/WH8560J1. Its messages do not apply to top-load washers, washer-dryers or different generations.
Before changing any settings, take a photo of the display and note whether the washer beeped, stopped or was waiting. Muting a beep does not fix the condition that triggered the alert.
Alerts that point to a user action
No TAP points to the water supply; out of bAL points to load distribution; Sud LOC points to suds. door Locd and door OPEn distinguish a locked door from an open door. They are not interchangeable, and forcing the same door closure will not resolve both.
If Err appears with a number
Keep the number and follow the recovery steps permitted by the manual. If it recurs or the document directs you to contact support, provide the model and sequence to the service provider. Do not reconstruct a numerical table from forums or use a fault code from another WashSmart model just because it shares the same product name.
Frequently Asked Questions
Do WashSmart and QuickSmart always display the same alerts?
This cannot be guaranteed for every generation. This index covers the specific front-load models included in the WH7560P1/WH8560P1 and WH7560J1/WH8560J1 manual.
Is it enough to record Err without the number that follows?
No. Err indicates a fault, and the number that follows identifies it for the service provider. Photograph both before trying any recovery steps.
Where can I find the full model number of my Fisher & Paykel washer?
On the appliance's identification plate. The manual consulted indicates that identification details are on the rear and/or above the drum opening; do not move an installed machine or force a door open to access them. Check the location specified for your model.
Keep the model family and the complete message together; a truncated word or Err without a number leaves out information needed for diagnosis.




