E03 indicates abnormal draining on the Sharp ES-FW70EW, ES-FW85SG and ES-FW105SG. Check the hose and user-accessible filter, safely draining the water first, before considering pump replacement.
Page 32 of the official ES-FW manual identifies E03. The same document describes filter maintenance; do not assume its access points apply to every Sharp model.
If water remains in the drum
Stop the washer and inspect the external hose routing. A kinked, pinched or incorrectly installed outlet hose can prevent draining, even if the pump is audible. The drain connection must also follow the series’ instructions.
Before cleaning the filter, disconnect the power and let the water cool. Prepare containers and follow the manual’s instructions for draining residual water; do not unscrew the cap all at once when the drum is full or the washer is running.
Reinstall the filter correctly before resuming operation, following the manual. If the water does not drain or E03 reappears, arrange for an inspection. A filter with no debris does not, by itself, confirm that the pump and controls are functioning properly.
Record whether cleaning uncovered a blockage and whether the subsequent draining cycle completed; these results help narrow down the inspection.
