Sharp washer error codes and warnings

Sharp washer error codes and warnings

With Sharp, the appliance family changes how the codes are interpreted. The manual for the Singapore models ES-FW70EW, ES-FW85SG and ES-FW105SG assigns E01 to the water supply and E02 to the lid lock.

Keep the model reference and leading zeros

The official Singapore ES-FW manual supports the code mappings in this index. Do not replace them with a table for Sharp front-load washers sold in another market. The family name helps identify the right technical document without turning this into a product listing.

The codes for this family

E01 for water supply and E02 for lid lock require different checks. E03 is related to draining and E04 to an unbalanced load; keep the leading zeros shown on the display, and do not mistake these warnings for similar codes on another Sharp model.

Before cleaning a filter, check the manual to identify which one it refers to: the water inlet and drain have different access points and precautions. Before redistributing the laundry, wait until movement has stopped and the door has unlocked.

If the model reference does not match the manual cited here, photograph the rating plate and display, then consult the documentation for your model. Do not assign an internal part to a code that your manual says requires service.

Frequently Asked Questions

Why do I find different meanings for Sharp E01?

Because different Sharp families use different code tables. For the Singapore models ES-FW70EW/85SG/105SG, E01 refers to the water supply; any other mapping needs to be confirmed in its own documentation.

Are E1 and E01 interchangeable?

Do not assume they are. Keep the leading zero and check the code exactly as it appears in the manual for your model.

How do I select my washer family?

Find the complete model number on the rating plate and check that it appears on the manual's cover. Function names or a similar-looking control panel are not enough.

What indicates that I need service after carrying out the checks?

The same warning remains after the external checks and authorized maintenance, there is visible damage, or the manual directs you to contact service. Do not repeatedly restart the washer to try to clear a persistent condition.

To continue, select the match between the model and the full code; sharing only the brand does not validate the table.