FE / E04 / E12 Error in LG Washing Machines: Overfill Detected

FE, E04 and E12 indicate overfilling in the documented LG front-load washers. If the water level keeps rising or water is overflowing, stopping the water supply takes priority over clearing the code.

The LG front-load washer table groups these code variations. The alarm alone cannot distinguish between water intake, level detection or control without a diagnosis.

Identify what you actually observe

  • Water continues entering while the cycle is stopped: note this observation and close the tap; do not reproduce it by opening the tap again as a test.
  • Water added through the dispenser: stop adding liquids and explain what was added. The tub must not be filled by hand to change a programme.
  • Message with no visibly high water level: the level detection may need to be checked. Do not add water to make what you see match the alarm.

If there is a leak, avoid handling wet plugs or connections. Disconnect the power from a dry, safe location if you can do so, or ask for help. Do not start repeated wash cycles to check whether it overflows again.

If the message is PE, follow its water-level reading troubleshooting steps. If AE is triggered, also record the leak detection. If FE recurs after the external conditions have been corrected, the washer needs servicing.

Keep a record of the message sequence and how the water level changes; a controlled overflow does not mean it is safe to resume without identifying the cause.

View all articles in LG washer error codes and messages