FE, E04 and E12 indicate overfilling on the documented LG front-loaders. If the water level continues to rise or there is an overflow, stopping the water supply takes priority over clearing the code.
The LG front-loader table groups these code formats together. The alarm alone cannot distinguish between water inlet, level detection or control issues without diagnosis.
Distinguish what you actually observe
- Water continues to enter while the cycle is stopped: note this observation and turn off the tap; do not reproduce it by opening the tap again as a test.
- Liquid added through the dispenser: stop adding liquids and explain what was added. The drum must not be filled by hand to alter a programme.
- Message with no visibly high water level: the detection system may need to be checked. Do not add water to make what you see match the alarm.
If there is a leak, avoid handling wet plugs or connections. Isolate the power from a dry, safe location if you can do so, or seek help. Do not start successive wash cycles to check whether it overflows again.
If the message is PE, follow its water-level reading troubleshooting steps. If AE is triggered, also note the leak detection. If FE recurs after the external conditions have been corrected, professional servicing is needed.
Keep a record of the message sequence and how the water level changes; controlling an overflow does not mean it is safe to resume without identifying the cause.
View all articles in LG washing machine error codes and messages
