FE, E04 and E12 indicate overfilling on the documented LG front-loading models. If the water level continues to rise or there is an overflow, stopping the water supply takes priority over clearing the code.
The LG front-loading washer table groups these spellings. The alarm does not tell you whether the cause is the water supply, level detection or controls; diagnosis is needed.
Distinguish what you can actually observe
- Water continues to enter while the cycle is stopped: note this and turn off the tap; do not recreate the situation by turning it on again as a test.
- Water added via the dispenser: stop adding liquids and explain what was added. The drum must not be filled by hand to change a programme.
- Message with no visibly high water level: the detection system may need checking. Do not add water to make what you see match the alarm.
If there is a leak, avoid handling wet plugs or connections. Isolate the power from a dry, safe place if you can do so, or ask for help. Do not start repeated washes to check whether it overflows again.
If the message is PE, follow the water-level reading troubleshooting steps. If AE is triggered, also note the leak detection. If FE recurs after the external conditions have been corrected, contact a service engineer.
Keep a record of the sequence of messages and how the water level changes; a controlled overflow does not mean it is safe to resume without identifying the cause.
View all articles in LG washing machine error codes and alerts
