AE Error in LG Front-Load Washers: Internal Leak Detection

AE indicates the detection of a possible internal leak in the LG front-load washers covered by this documentation. If you see water, stop using the washer and shut off the water supply before considering a restart.

The LG front-load washer table links AE to leak protection. The alarm may require checking both the source of the water and the detection system; it does not point to a specific connection.

If there is water nearby

Turn off the water supply valve if you can reach it from a safe area. Avoid touching the plug or the washer’s cabinet if there is water near electrical components. If you need to disconnect the power, do so from a dry, safe location or ask a professional for help.

With the washer stopped and disconnected from power, check accessible external connections and hoses. A drop at a connection is useful information; no water visible outside does not rule out moisture inside.

Don’t make the alert disappear by hiding the water

Don’t tilt the washer to drain a tray or disable the detector. Even if AE disappeared, these actions would not fix the source of the leak. Don’t run successive wash cycles to try to locate it, either.

If AE reappears and there is no correctable external cause, arrange an inspection. For any LG washer with a different design, first confirm that its manual gives AE this meaning.

Take a photo of the damp area and the code without taking the washer apart; this will help identify the problem during the inspection.

View all articles in LG washer error codes and messages