E3 Error on ASKO: Filling Problems

E3 on the ASKO WM76S indicates a filling problem. Check the water supply, inlet and drain hose placement according to the W3096RW manual before trying again.

From the tap to the water level

The manufacturer’s documentation covers the tap, inlet screen, hose and drain height. First, check whether water is being supplied and whether a valve has been left closed. Check the hose for any kinks or deformation.

If water enters but does not stay in the machine, note whether it drains away at the same time. Compare the height and connection with the installation section: a setup that causes siphoning cannot be fixed by restarting the control panel.

Accessible screen and recovery

If the manual allows you to clean the inlet, turn off the water, prepare the appliance and disconnect only the specified connection. Reinstall the screen and gasket, then check for leaks. The inlet filter guide provides more details on preparation.

The WM76S manual says to continue by confirming on the control panel after checking the conditions. If E3 appears again, request service and provide the model and your observations about the filling process. Permitted pressures are specified in the manual; do not apply those limits to other ASKO generations.

Distinguish restoring the water supply from clearing the message: only the former fixes a water outage.

View all articles in Error codes and alerts for ASKO washing machines