How to wash down jackets and filled garments

The jacket must be suitable for a full wash, with a compatible drying method that reaches the fill. Natural down and synthetic fill may require different products and care.

Inspect the garment

Read the care label and check the baffles, seams, zip and any damaged areas. A small opening can release fill as the garment moves. Check whether the hood, trims or other parts can be removed, and do so only if the design allows.

The outer fabric matters too: a jacket with a membrane must meet its restrictions as well as those of the washing machine. Approval for the fill does not mean you can ignore them.

Prepare for washing

  1. Treat dirt on the collar or cuffs only using an approved method.
  2. Use a product suited to the fill and measure the dose; disable any incompatible automatic detergent dispenser.
  3. Load the garment with enough space and distribute it according to the approved programme.
  4. Complete the wash, rinse and spin within the permitted limits.
  5. Take it out with support so the full weight of the wet garment does not strain a seam.

Finish drying the inside

Follow the care label’s method until the fill is completely dry. Don’t assume a tumble dryer, dryer balls or a temperature used for another jacket are suitable. The surface may feel dry while moisture remains between the baffles.

Fill that has clumped while still wet does not, by itself, indicate irreversible damage. Check its distribution and loft once the approved drying method is complete. If the problem persists, contact the manufacturer before putting it through further cycles or rubbing it.

For a doona, the size and whether the whole item can be loaded require a different assessment.

View all articles in How to wash fabrics, garments and household textiles