How to wash down jackets and garments with filling

The jacket must be suitable for a full wash, and there must be a compatible drying method that reaches the filling. Natural down and synthetic filling may require different products and care.

Inspect the garment

Read the care label and check the compartments, seams, zip and any damaged areas. A small opening can release filling as the garment moves. Check whether the hood, trims or other parts can be removed, and do so only if the design allows.

The outer fabric matters too: a jacket with a membrane must comply with its restrictions and those of the washing machine. Approval for the filling does not mean you can ignore them.

Prepare for washing

  1. Treat dirt on the collar or cuffs only using an approved method.
  2. Use a product suitable for the filling and measure the dose; disable any automatic detergent dosing that is not compatible.
  3. Place the garment in the machine with enough space, and distribute it as required by the permitted programme.
  4. Complete the wash, rinse and spin within the specified limits.
  5. Remove the garment with support so that the full weight of the wet item does not strain a seam.

Finish drying the inside

Follow the care label’s method until the filling is completely dry. Do not assume a tumble dryer, balls or a temperature used for another jacket will be suitable. The surface may feel dry while moisture remains between the compartments.

Filling that has clumped together while still damp does not, by itself, indicate irreversible damage. Check its distribution and loft once the permitted drying method is complete. If the problem persists, consult the manufacturer before putting it through further cycles or rubbing it.

For a duvet, the volume and whether the entire item can be admitted require a different assessment.

View all articles in How to wash fabrics, garments and home textiles