The jacket must be suitable for a complete wash, and there must be a compatible drying method that reaches the filling. Natural down and synthetic filling may require different products and care.
Inspect the entire garment
Read the care label and check the baffles, seams, zipper and any damaged areas. A small opening can release filling as the garment moves. Check whether the hood, trims or other parts can be removed, and remove them only if the design allows.
The outer fabric matters too: a jacket with a membrane must meet its restrictions, as well as those of the washing machine. Approval for the filling does not mean you can ignore them.
Prepare for washing
- Treat dirt on the collar or cuffs only with an approved method.
- Use a product suitable for the filling and measure the dose; turn off automatic detergent dosing if it is incompatible.
- Place the garment in the machine with enough room and distribute it as required by the approved program.
- Complete the wash, rinse and spin within their limits.
- Remove the garment with support so the full weight of the wet item does not strain a seam.
Finish drying the inside
Follow the care label’s method until the filling is completely dry. Don’t use a dryer, balls or a temperature setting borrowed from another jacket. The surface may feel dry while moisture remains between the baffles.
Clumped filling while still damp does not, by itself, indicate irreversible damage. Check its distribution and loft once drying is complete using the approved method. If the problem persists, consult the manufacturer before putting the garment through more cycles or friction.
For a duvet, the volume and whether the whole item can be loaded require a different assessment.
View all articles in How to wash fabrics, garments and household textiles
