The jacket must be suitable for a full wash and have a compatible drying method that dries the filling. Natural down and synthetic filling may need different products and care.
Inspect the whole garment
Read the care label and check the compartments, seams, zip and any damaged areas. A small opening can release filling as the garment moves. Check whether the hood, trims or other parts can be removed, and do so only if the design allows.
The outer fabric matters too: a jacket with a membrane must comply with its restrictions as well as those of the washing machine. Approval for the filling does not mean you can ignore them.
Prepare for washing
- Treat dirt on the collar or cuffs only using an approved method.
- Use a product suitable for the filling and measure the dose; switch off any automatic detergent dispenser if it is incompatible.
- Place the garment in the machine with enough room and distribute it according to the permitted programme.
- Complete the wash, rinse and spin within the specified limits.
- Take it out with support so that the full weight of the wet garment does not strain a seam.
Finish drying the inside
Follow the care label’s method until the filling is completely dry. Do not assume a tumble dryer, balls or a temperature setting used for another jacket is suitable. A dry surface can conceal moisture between the compartments.
Filling that is clumped together while still wet does not, by itself, indicate irreversible damage. Check its distribution and loft once the approved drying method is complete. If the problem persists, consult the manufacturer before putting it through further cycles or exposing it to friction.
For a duvet, the volume and whether the entire item is suitable for washing need to be assessed differently.
View all articles in How to wash fabrics, garments and household textiles
