HE identifies detergents intended for high-efficiency machines in markets that use this designation. If the manual requires HE or low-sudsing detergent, the product label must confirm its compatibility.
The machine’s opening alone is not enough to decide
Some top-loaders have high-efficiency requirements, and markets use different terminology. Don’t choose a detergent solely because the door is at the front or top. Check the product instructions in the manual and the information on the available packaging.
HE detergent comes in various formats and concentrations. Low-sudsing doesn’t mean you should add more until you see suds; the dose still depends on the load, how dirty it is and the water.
If you’ve used an incompatible product
Keep the packaging and note how much you added, including any automatic dose. Follow the appliance’s recovery procedure. Some machines manage suds during the cycle; don’t interrupt that process based on guesswork or add a homemade defoamer.
If the product comes out of the machine or there’s water near electrical connections, prioritise stopping the machine safely and don’t handle wet plugs. The guide to excess suds distinguishes cycle recovery from overflow.
Restarting with a suitable formulation
Once you’ve completed the manufacturer’s procedure, check the load for rinsing issues and residue before drying it. For the next wash, use a detergent explicitly approved for your machine and measure the dose according to its label, even if you’ve switched to packaging that looks similar.
Whenever you change detergents, check compatibility and dosage again. The HE designation doesn’t eliminate differences in concentration.
View all articles in Laundry detergents, dosing and additives
